Phillips slot is very hand tbf, you have a phillips screwdriver? Good you will have good grip, you don’t have one? Good you will still be able to unscrew that
I’ll give you that but all the others are in my opinion completely unnecessary and just cause issues. To me anything other than a Philips head is completely unnecessary and deliberately over complicated.
No because no one has a screwdriver that can fit it, they have to go out and explicitly buy one just so they can undo a screw.
Unless something really super duper seriously needs to stay tightened a Phillips is the way to go. I don’t want to have to start a project only to have to go out and buy something that I’ll only ever use once because it’s some weird exotic screw head. Phillips is what data centres use to secure computers to server racks so it’s obviously pretty good.
I like the sentiment that there should be one awesome screw head used everywhere, even if it wouldn’t ever 100% happen.
But phillips head is garbage. I agree with the other reply: torx all day long. Honestly, many of the others are good designs that could likewise handle a lot of torque with less tendency to cam out. But torx has kind of already become that standard, at least around me in the US.
And, in my experience, it’s proven itself in the field. My non-tech hobbies have involved a lot of outdoor construction this year. I used an impact driver to bury big 6" screws all the way into pressure treated lumber about 1,000 times, and then about a thousand other smaller 2.5" - 3.5" outdoor screws. All of them were torx.
And subjectively, the bit engages like a cylindrical gear but without any sharp corners. It seems like it should be easier to clean a screw dropped in the mud. I’ve had to do that more than once, but I didn’t do a comparison, lol.
Phillips slot is very hand tbf, you have a phillips screwdriver? Good you will have good grip, you don’t have one? Good you will still be able to unscrew that
I get a better grip with slot than Phillips, which is good if I’m using an electric screwdriver and want to cam out at a certain torque
I’ll give you that but all the others are in my opinion completely unnecessary and just cause issues. To me anything other than a Philips head is completely unnecessary and deliberately over complicated.
No way. Torx over Phillips all day
No because no one has a screwdriver that can fit it, they have to go out and explicitly buy one just so they can undo a screw.
Unless something really super duper seriously needs to stay tightened a Phillips is the way to go. I don’t want to have to start a project only to have to go out and buy something that I’ll only ever use once because it’s some weird exotic screw head. Phillips is what data centres use to secure computers to server racks so it’s obviously pretty good.
I like the sentiment that there should be one awesome screw head used everywhere, even if it wouldn’t ever 100% happen.
But phillips head is garbage. I agree with the other reply: torx all day long. Honestly, many of the others are good designs that could likewise handle a lot of torque with less tendency to cam out. But torx has kind of already become that standard, at least around me in the US.
And, in my experience, it’s proven itself in the field. My non-tech hobbies have involved a lot of outdoor construction this year. I used an impact driver to bury big 6" screws all the way into pressure treated lumber about 1,000 times, and then about a thousand other smaller 2.5" - 3.5" outdoor screws. All of them were torx.
And subjectively, the bit engages like a cylindrical gear but without any sharp corners. It seems like it should be easier to clean a screw dropped in the mud. I’ve had to do that more than once, but I didn’t do a comparison, lol.